Section Detail of 100 80 25 NB Nozzle Drawing With ANSI 150 Flange

<p>This AutoCAD drawing presents a <a href="https://cadbull.com/Detail" rel="noopener noreferrer" target="_blank"><strong>detailed</strong></a> sectional view of a 100 NB, 80 NB, and 25 NB nozzle assembly used in industrial piping and equipment connections. The drawing clearly illustrates concentric pipe arrangements with 100 NB and 80 NB SCH 40 pipes, along with a 25 NB SCH 40 branch connection at the top. Dimensional details such as 229 mm outside diameter, 157 mm internal bore, and 117 mm inner reference length are precisely marked to support fabrication accuracy. The nozzle includes an ANSI 150 BLRF flange at the top, flange thickness references, bolt hole layout with 8 holes of 19 mm diameter on a 180.5 mm pitch circle diameter, and a pipe cap detail for proper closure.</p><p>The section also highlights <a href="https://cadbull.com/Rcc-detail-cad-drawing" rel="noopener noreferrer" target="_blank"><strong>reinforcemen</strong></a>t pad details of 12 mm thickness with a 230 mm diameter and a 1 by 8 BSP tapped hole for vent or drain connection. Weld symbols, including full penetration welds with 70-degree angles, are shown to guide manufacturing standards. Additional branch nozzles and angular pipe connections are dimensioned for orientation and spacing. This AutoCAD DWG file is suitable for engineers and designers working on pressure vessels, piping systems, and industrial equipment layouts. Access through a Cadbull subscription allows seamless use of this accurate nozzle drawing in AutoCAD and other compatible CAD platforms for reliable design coordination.</p>