This AutoCAD DWG file presents a detailed overall sectional drawing of a 38-storey office tower developed with integrated basement, podium, and high-rise office floors. The drawing clearly illustrates three basement levels used for car parking and mechanical services, followed by a multi-level podium accommodating parking and plant rooms. Above the podium, multiple office floors are shown with consistent floor-to-floor heights, vertical circulation cores, lift lobbies, service shafts, and mechanical zones. The section defines precise level markers from basement B3 up to roof level, including lift motor room and over travel zones. Setback lines are clearly indicated, including 2300 mm basement setback, 6100 mm podium setback, and 12200 mm building setback from boundary lines. Dimensional grids, floor heights, and vertical measurements are provided in millimetres to support accurate coordination. The drawing also references façade systems, curtain wall zones, aluminium fins, louvers, and cladding extents aligned with each building level.This sectional DWG drawing is suitable for <a href="https://cadbull.com/Cad-Architecture" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">architects</a>, civil engineers, builders, and CAD professionals involved in high-rise commercial building planning. It supports architectural coordination, <a href="https://cadbull.com/Structure-detail" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">structural </a>alignment, façade planning, and services integration for large-scale office developments. The drawing is prepared to professional standards for design development, tender documentation, and construction reference.

38 Storey Office Tower Overall Section With Basement And Podium DWG

This AutoCAD DWG drawing set presents a comprehensive stormwater drainage system layout prepared for site and building-level water management planning. The drawings include detailed stormwater services legends, roof drainage layouts, pit locations, pipe routing, and flow direction indicators to support effective surface water control. Plan views clearly show catchment areas, drainage lines, inspection pits, and connection points with accurate offsets and alignment references. The drawings are annotated with dimensional data, levels, and layout spacing to assist in precise site coordination. <a href="https://cadbull.com/Structure-detail" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">Structural </a>details of stormwater pits, grates, and associated sections are also illustrated, providing clarity on installation depth, component arrangement, and construction requirements.Additional details include sectional views and enlarged component drawings that explain pit construction, inlet and outlet connections, and slab interface conditions. Levels, invert details, and layout grids are clearly marked to ensure compatibility with architectural and civil coordination drawings. The drawing set is suitable for architects, civil engineers, builders, and CAD professionals involved in site development, infrastructure planning, and drainage design. This DWG file supports AutoCAD-based workflows and offers clear, execution ready stormwater detailing required for accurate planning, coordination, and <a href="https://cadbull.com/Construction-Cad-Drawing" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">construction </a>documentation.

Stormwater Drainage Layout And Pit Details Plans DWG Drawing

This AutoCAD DWG drawing provides a precise anchor bolt detail prepared for <a href="https://cadbull.com/Structure-detail" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">structural </a>and foundation applications. The drawing illustrates a 60mm diameter anchor bolt with a total length of 1750mm, including a clearly marked threaded portion of 250mm exposed above the concrete level. The detail identifies key components such as bolt head, washer arrangement, tack weld position, and heavy hex nut configuration with three washers per bolt. All dimensions are defined in millimeters, ensuring clarity for fabrication accuracy and on-site installation alignment. The drawing layout supports easy interpretation for engineering coordination and construction detailing.Material and surface protection specifications are clearly mentioned in the drawing, with the anchor bolt defined as ASTM A307 Grade B material and hot dip galvanizing as per ASTM A123 and BS 729 standards. These specifications help ensure strength, durability, and corrosion resistance in structural connections. The DWG file is suitable for <a href="https://cadbull.com/Cad-Architecture" rel="noopener noreferrer" target="_blank" style="color: rgb(17, 85, 204); background-color: transparent;">architects</a>, civil engineers, structural designers, builders, and CAD professionals working on foundation bolts, base plate connections, and industrial or building structures. The detailed annotation and clean drafting style make this drawing useful for design review, shop drawings, and execution level documentation where dimensional accuracy and material clarity are critical.

Anchor Bolt 60mm Diameter Details Drawing With 1750mm Length

This AutoCAD DWG file contains a comprehensive set of residential <a href="https://cadbull.com/Apartment-Flat" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">apartment </a>drawings prepared with clear planning logic and technical accuracy. The drawing includes G plus apartment floor plans showing detailed room layouts, circulation spaces, staircases, lift cores, balconies, and common areas with proper alignment and proportional spacing. Each plan is drafted with precise dimensions, wall thicknesses, opening sizes, and level markings to support accurate architectural planning. The layout ensures efficient space utilization while maintaining functional connectivity between private and shared areas within the residential structure.In addition to floor plans, the drawing set covers front and side elevations along with sectional views that explain floor-to-floor heights, slab levels, structural alignment, and vertical circulation details. Column grids, structural references, and annotated measurements are clearly indicated to support coordination between architectural and <a href="https://cadbull.com/Structure-detail" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">structural </a>planning. These DWG drawings are suitable for architects, civil engineers, interior designers, builders, and construction professionals who require reliable residential apartment planning data for design development, approvals, and execution stages. The file supports AutoCAD-based workflows and helps maintain consistency, clarity, and accuracy across residential building projects.

G Plus Residential Apartment Detailed Plans, Sections, Elevations DWG

This AutoCAD DWG file illustrates a comprehensive commercial drainage system layout developed to support accurate plumbing and wastewater planning. The drawing presents detailed ground-floor drainage arrangements with clear plan views and sectional details for sanitary fixtures. It includes precise pipe routing using standard diameters such as 100 mm, 200 mm, and 300 mm to ensure efficient flow and proper system performance. Floor drain connections, gully traps, cleanouts, vent pipes, and slab penetration details are clearly marked with correct slopes and offsets. Each element is labeled with technical clarity, allowing professionals to easily interpret installation requirements and coordinate drainage systems within commercial building layouts.The drawing further provides enlarged sectional views of floor drains, pipe sleeves, concrete floor connections, and wall penetrations. Vertical and horizontal junctions are shown with accurate alignment, levels, and spacing to reduce execution errors during <a href="https://cadbull.com/Construction-Cad-Drawing" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">construction</a>. Inspection chambers, fixture connections, and vent terminations are detailed to support long-term system reliability and maintenance access. Standardized symbols, consistent scales, and well-defined annotations enhance readability for architects, civil engineers, <a href="https://cadbull.com/Interior-design" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">interior </a>designers, builders, and MEP consultants. This DWG file serves as a reliable technical reference for designing, reviewing, and executing commercial drainage systems with improved coordination, accuracy, and construction efficiency.

Commercial Drainage System Details DWG with 300 mm Pipe Layout

This pipeline construction layout provides a complete alignment plan featuring precise chainage points, pipe specifications, fittings, valve positions, material tags, and construction instructions as shown in the drawing sheet. The layout includes the full linear pipeline route, detailed node labeling, support locations, and construction notes for installation accuracy. The material list displayed on the left of the sheet includes pipes, bends, tees, reducers, supports, and fittings with quantities, enabling engineers and contractors to plan procurement and installation with clarity. All elevation references, coordinates, and structural callouts are shown for uninterrupted on-site execution.This pipeline<a href="https://cadbull.com/Construction-Cad-Drawing" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);"> construction </a>layout provides a complete alignment plan featuring precise chainage points, pipe specifications, fittings, valve positions, material tags, and construction instructions as shown in the drawing sheet. The layout includes the full linear pipeline route, detailed node labeling, support locations, and construction notes for installation accuracy. The material list displayed on the left of the sheet includes pipes, bends, tees, reducers, supports, and fittings with quantities, enabling engineers and contractors to plan procurement and installation with clarity. All elevation references, coordinates, and <a href="https://cadbull.com/Structure-detail" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">structural </a>callouts are shown for uninterrupted on-site execution.

Pipeline Construction Layout with Detailed Alignment and Material List

This AutoCAD DWG file presents a preliminary piping layout, showing a detailed 2200 mm pipe section with sectional hatching, internal layering, and joint indicators as illustrated on page 1 of the drawing. The drawing displays tagged components such as item 1, representing a directional connection reference, and item 4, marking the PN10 swivel flange installation point. The cutaway view of the pipe reveals the internal <a href="https://cadbull.com/Structure-detail" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">structure</a>, wall thickness representation, and insulation or lining pattern, allowing engineers to evaluate early routing and connection feasibility. These features make the drawing valuable for pre-<a href="https://cadbull.com/Construction-Cad-Drawing" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">construction</a> planning, material selection, and alignment verification. Additional notations in the layout support coordination between mechanical services, identifying the flange interface and pipe length requirements. The “PRELIMINARY” header indicates that this drawing serves as an initial engineering reference before detailed fabrication is issued. The straightforward linework and proportional scaling help architects, civil engineers, MEP designers, and contractors integrate this piping layout into larger system drawings. This DWG is ideal for those requiring an accurate piping layout DWG for early-stage design, routing evaluation, and technical review during schematic development.

Preliminary Piping Layout DWG with 2200 mm Section and Flange Details

This adsorption chamber general arrangement file provides a complete engineering layout featuring front, side, and sectional elevations. The drawing includes precise placement of activated carbon, pre-distributor assembly, hinged access door clearance, and full dimensional references. Key specifications such as 76.1 mm OD × 150 spigot, 64 OD chain link, SA 312 TP 304 pipes, 150# WNRF flanges, and base plate dimensions are clearly detailed for accurate fabrication. Additional information, such as valve positions, pivot points, and counterweight installation, is shown for reliable mechanical operation.The file also includes a comprehensive nozzle list with service types, flange ratings, and neck dimensions, enabling seamless integration into industrial systems. Structural components such as gusset plates, lifting lugs, reinforced pad details, and welded joints are fully dimensioned for <a href="https://cadbull.com/Construction-Cad-Drawing" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">construction</a> precision. With complete baseplate geometry, bolt hole spacing, and material grades, this drawing ensures high-quality execution for industrial adsorption systems. This technical layout is ideal for <a href="https://cadbull.com/Cad-Architecture" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">architects,</a> civil engineers, mechanical designers, and industry professionals requiring accurate AutoCAD references for manufacturing and installation.

Adsorption Chamber Structural Layout with Nozzle and Baseplate

This detailed methanol and toluene storage tank fabrication drawing provides complete <a href="https://cadbull.com/Construction-Cad-Drawing" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">construction</a> information for a medium-duty cylindrical vessel designed with a shell size of 6150 mm in length and 3150 mm internal diameter. The layout includes full ASME Sec VIII Div 1 compliance data, 10–12 mm shell thickness, stiffening ring placement, dish-end dimensions, nozzle locations, support details, and saddle foundation requirements. The drawing clearly illustrates nozzle orientation (N1–N12), 600 NB manholes, M24 bolting details, vent openings, lifting lugs, earthing cleats, and <a href="https://cadbull.com/Structure-detail" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">structural </a>connections for safe installation. Every componentfrom counterweight section to impingement plate specifications, is represented with exact measurements for accurate fabrication.This layout also includes a complete bill of materials with SA 516 Grade 70 and IS 2062 Grade A material specifications. The tank’s hydrotest pressure, design temperature, corrosion allowance, and working load parameters are highlighted for engineering validation. Detailed sectional elevations, welding notes, support plate dimensions, saddle spacing, and reinforcement diagrams ensure precision for manufacturing and site erection teams. Ideal for <a href="https://cadbull.com/Cad-Architecture" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">architects</a>, civil engineers, plant designers, and construction professionals, this file supports efficient project execution and ensures compliance with industrial tank installation standards.

Medium Duty Methanol Storage Tank Fabrication Drawing 6150x3150 mm

This detailed basement floor perforated drain pipe layout provides a complete overview of the underground drainage system, highlighting the exact pipe routes, perforation lines, and flow directions required for efficient water management. The drawing includes precise dimensions for the cistern tank, fire reserve water tank, and connecting pipelines, ensuring accurate placement during construction. All measurements, levels, and <a href="https://cadbull.com/Structure-detail" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">structural </a>references are clearly marked to support proper alignment and reduce installation errors on-site.In addition, the plan illustrates essential basement features such as tank depth, inlet and outlet positions, and drainage collection pathways designed to prevent waterlogging and structural damage. This AutoCAD layout is ideal for <a href="https://cadbull.com/Cad-Architecture" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">architects</a>, civil engineers, and builders who need a reliable and technically accurate reference for designing and executing basement drainage systems. It supports professional workflow, improves design clarity, and ensures long-term functionality in residential and commercial <a href="https://cadbull.com/Projects" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">projects</a>.

Basement Floor Perforated Drain Pipe Layout with Detailed Tank Plan

This AutoCAD drawing provides a complete structural layout of column footings and reinforcement detailing for accurate <a href="https://cadbull.com/Construction-Cad-Drawing" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">construction</a> execution. The design highlights 400x400 mm column bases with precise reinforcement spacing, ensuring strength and stability in load-bearing structures. Each footing includes detailed reinforcement bar arrangements, including Ø8 mm stirrups at 150 mm spacing and D13 mm main bars placed uniformly for structural balance. The drawing also outlines slab connections, support beams, floor-level measurements, and column alignment to guide engineers and builders during site implementation. Clear sectional views display depth dimensions, concrete cover thickness, bar placement, and foundation levels, helping professionals visualize the reinforcement assembly before construction begins. The layout also includes top and bottom reinforcement placement with exact measurements for height, foundation depth, and beam connections, ensuring compliance with standard structural design practices. This detailed <a href="https://cadbull.com/Structure-detail" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">structural </a>plan is ideal for architects, civil engineers, contractors, and <a href="https://cadbull.com/Construction-Cad-Drawing" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">construction</a> supervisors who require accurate reinforcement design for residential or commercial building projects.

Column Footing and Reinforcement Plan with 400x400 mm Details

This residential <a href="https://cadbull.com/Cad-Architecture" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">architectural </a>file provides a complete set of professionally drafted drawings, offering everything needed for accurate planning and execution. The sheets include detailed floor plans, wall layouts, roof outlines, window and door schedules, and clearly dimensioned elevation views that illustrate façade finishes, opening placements, and overall building height references. Each plan is supported with <a href="https://cadbull.com/Construction-Cad-Drawing" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">construction</a> notes and material specifications, ensuring clarity for architects, engineers, and builders. The inclusion of rendered exterior perspectives enhances visual understanding of the proposed residence, making it useful for presentations and client approvals.The drawing set also contains structural layouts, foundation details, footing reinforcement diagrams, electrical notes, and sectional views that highlight slab levels, load-bearing points, and connection details. Interior room layouts, grid markings, and measurement annotations assist in precise residential planning and seamless coordination during construction. With its comprehensive range of architectural, <a href="https://cadbull.com/Structure-detail" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">structural</a>, and electrical information, this file is ideal for residential project development, site execution, municipal permitting, and design documentation. It supports users across AutoCAD, Revit, SketchUp, and similar platforms, making it a highly practical resource for professionals involved in residential building design and construction.

Residential Architectural Plans with Elevations and Structural Details

Explore Liam White’s CAD drawings with 3957 ready-to-use files on Cadbull.

Liam White

Liam White

3957

Sort by

Default (by Date)

A to Z

Z to A

Sort by Date