Aluminium Window Schedule Drawing With Sizes, Glazing, and Elevations

This AutoCAD DWG drawing presents a comprehensive aluminium window schedule prepared for a commercial transport station building. The drawing includes detailed window elevations, sectional references, and a complete window schedule table identifying window IDs such as W01 to W17 with corresponding room names, including WC male, WC female, cleaner room, information kiosk, ticket office, station manager, cantina, and manager's office. Structural opening sizes are clearly specified in millimetres, including common dimensions like 931 x 300 mm, 1000 x 300 mm, 937 x 1960 mm, 995 x 1000 mm, 1300 x 1700 mm, and extended shopfront type windows up to 5480 x 1700 mm. Wall thicknesses of 280 mm and 110 mm plastered masonry are indicated for accurate coordination with architectural construction. Aluminium-framed windows are detailed with aluminium angle sub-frames built into brickwork openings, ensuring installation clarity.

The drawing also specifies window finishes, glazing types, and performance requirements. All windows are noted with 6.38 mm laminated safety glazing of intruder-resistant specification, complying with standard safety and building regulations. Powder-coated aluminium finishes are referenced as per specification, with colour-coated panels below windows where required. Elevation details show finished floor levels, underside of beams, lintel heights, and steel structure references for vertical coordination. General notes confirm that all dimensions are in millimetres, drawings must not be scaled, and site verification is mandatory before fabrication. This window schedule drawing is suitable for architects, civil engineers, facade consultants, interior designers, and builders who require precise aluminium window scheduling with sizes, elevations, glazing specifications, and installation references for construction execution, supported by interior and public facility drafting resources such as 2D CAD blocks of revolving doors and public toilet elements prepared in AutoCAD DWG format for design coordination.