This AutoCAD DWG provides a complete<a href="https://cadbull.com/Cad-Architecture" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);"> architectural</a> and engineering plan set that includes the house floor plan, front and rear elevations, left and right side elevations, and detailed cross sections as shown in the sheet layout on page 1. The drawing also features structural layouts such as the roof beam plan, multiple truss diagrams with varied configurations, and column footing details with reinforcement placement. Each section and elevation includes accurate dimensions, window and door schedules, material references, and clear construction notes suitable for residential building design.The DWG further includes mechanical and electrical layouts such as lighting and outlet placement, power outlet routing, panel board schedule, and load computation. The plumbing layout shows sewer line directions, pipe sizing, and fixture locations, along with a complete legend. This combination of architectural, structural, electrical, and plumbing drawings makes the file highly valuable for architects, civil engineers, <a href="https://cadbull.com/Interior-design" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">interior designers</a>, and builders who need a complete house elevation and floor plan AutoCAD DWG for construction planning, coordination, and project documentation.

Complete House Elevation Floor Plan Roof Beam and Plumbing DWG Set

&nbsp;This AutoCAD DWG file presents a complete and measurement-accurate site development plan for a three-storey residential building, showing a detailed 15000mm layout with exact building lines, lot boundaries, and technical descriptions used for zoning and <a href="https://cadbull.com/Cad-Architecture" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">architectural </a>planning. The drawing includes precise bearings and distances such as 12.00m, 10.82m, 7.60m, and 13.56m, ensuring clear direction-based plotting. Multiple lot and block references are included, such as Lot 3 BLK 2, Lot 5 BLK 2, Lot 9 BLK 2, Lot 10 BLK 2, and Lot 8 BLK 2, helping users understand the full arrangement surrounding the main residential structure. The technical description box also outlines tie line information and site coordinates, supporting accurate land development documentation. The DWG further features an exterior perspective of the three-storey residential building, a complete vicinity map, and a north-orientation marker to guide proper site alignment. Roads such as Molave Drive, Narra Street, Ipil Street, and Greenfield Parkway are clearly shown for access identification. Along with the structured layout, the table of contents lists relevant architectural, <a href="https://cadbull.com/Structure-detail" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(17, 85, 204);">structural</a>, electrical, and plumbing sheets included in the full project set. This drawing is ideal for architects, civil engineers, and designers who require reliable, detailed, and ready-to-use CAD data for residential site planning and submission.

Three Storey Residential Site Development Plan with 15000mm Layout

This AutoCAD DWG subdivision plan provides a complete<a href="https://cadbull.com/Commercial-complex" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(0, 0, 0);"> commercial building</a> layout from ground floor to upper floors, designed for architects, civil engineers, and <a href="https://cadbull.com/Interior-design" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(0, 0, 0);">interior </a>designers who need precise, ready-to-use drafting references. The ground floor layout includes a series of shops arranged with accurate measurements such as 12 ft 3 in lengths, 9 ft 6 in widths, and 10 ft deep segments, supported by multiple passages for circulation. Shop units include clear sizes such as 10 ft 5 in by 8 ft 9 in, 10 ft 5 in by 8 ft 10 in, 10 ft 5 in by 7 ft 5 in, and 10 ft 5 in by 5 ft 4 in, enabling transparent spatial planning for commercial use. The centrally placed staircase block measuring 5 ft by 5 ft ensures easy vertical movement.The first floor expands the layout with fourteen shop units featuring 3 ft projections, 5 ft and 4 ft 9 in passages, and internal widths of 6 ft 2 in, 6 ft 10 in, 8 ft 3 in, and 11 ft 3 in. The upper floors include Flat No. 1 and Flat No. 2, with full building dimensions of 62 ft 6 in depth, 29 ft 8 in frontage, and sections of 20 ft and 43 ft that clearly define the residential or mixed-use structure. This detailed DWG drawing helps professionals save drafting time and ensures accurate project planning.

Ground and Upper Floor AutoCAD Subdivision Plan with Shops Layout

This residential AutoCAD layout presents complete ground and first-floor designs with detailed room dimensions and functional zoning. The ground floor includes rooms sized 17 ft x 12 ft, 14 ft x 12 ft, and 12 ft x 12 ft 6 in, with master rooms shown as 17 ft x 12 ft 6 in. Lounges measure 15 ft x 20 ft and 12 ft x 21 ft, providing central circulation. <a href="https://cadbull.com/Kitchen" rel="noopener noreferrer" target="_blank" style="color: rgb(0, 0, 0); background-color: transparent;">Kitchens </a>appear as 13 ft x 8 ft, 8 ft x 8 ft, and 6 ft x 8 ft 6 in, supported by open service spaces. Bathrooms include measurements such as 10 ft x 4 ft, 8 ft 3 in x 5 ft, 7 ft x 6 ft, and 4 ft x 10 ft 6 in. Multiple open-to-sky voids measuring 3 ft, 6 ft 6 in, and 2 ft 6 in enhance ventilation.&nbsp;The plans also show a 10 ft 6 in x 17 ft porch, 11 ft x 18 ft car porch, staircases sized 13 ft x 10 ft, 17 ft x 13 ft 6 in, and corridors from 3 ft 6 in to 8 ft wide. First-floor layouts include lounges of 16 ft x 27 ft, kitchens of 13 ft x 8 ft, terraces ranging from 6 ft to 6 ft 6 in, rooms such as 14 ft x 12 ft, 10 ft x 12 ft, 11 ft 6 in x 14 ft, and balconies measuring 4 ft to 4 ft 6 in. These DWG plans offer a complete reference for architects, civil engineers, <a href="https://cadbull.com/Interior-design" rel="noopener noreferrer" target="_blank" style="color: rgb(0, 0, 0); background-color: transparent;">interior designers</a>, and builders needing accurate residential planning.

Large House Cad Drawing Plan with Rooms Lounges Kitchens and Baths

This AutoCAD DWG apartment building plan provides a complete multi-storey layout including basement, ground floor, six typical floors, and a penthouse level. The ground floor includes a commercial hall of 1870 sq ft, circulation areas, and ramp access to the basement. Typical floors feature multiple apartments, such as units with carpet areas of 505.96 sq ft, 656.06 sq ft, and 621.06 sq ft, each configured with <a href="https://cadbull.com/Master-bedroom" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(0, 0, 0);">bedrooms </a>measuring 10 ft x 11 ft 9 in, 11 ft x 10 ft 3 in, and 10 ft x 10 ft 9 in, along with lounges sized 11 ft x 15 ft 8 in and kitchens of 11 ft 6 in x 8 ft 2 in.&nbsp;Each apartment includes 7 ft x 5 ft baths, 3 ft wide balconies, an 8 ft x 6 ft lift box, and 6 ft 6 in passages. The site plan measures 50 ft x 72 ft, while the block plan defines COS open spaces ranging from 5 ft 6 in to 7 ft 6 in. Section A-A illustrates vertical heights up to +87 ft, showing commercial hall, apartment floors, RCC column sizes, and structural levels, making this plan ideal for architects, civil engineers, <a href="https://cadbull.com/Interior-design" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(0, 0, 0);">interior designers</a>, builders, and AutoCAD users seeking a fully dimensioned multi-floor cad drawing.

Apartment Building Cad Drawing with Commercial Hall and Floor Plans

This residential layout drawing provides complete ground, first, and second floor plans with full measurements for all rooms, lounges, <a href="https://cadbull.com/Kitchen" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(0, 0, 0);">kitchens</a>, and open spaces. The ground floor includes rooms sized 10 ft 6 in x 10 ft 6 in, 10 ft x 10 ft 6 in, 10 ft x 11 ft 9 in, 11 ft 6 in x 11 ft 6 in, a 29 ft x 6 ft lounge, and a 6 ft x 11 ft kitchen. Bathrooms measure 6 ft 3 in x 6 ft, 6 ft 9 in x 6 ft, and 5 ft x 10 ft 9 in, shown with ventilation and open-to-sky shafts of 5 ft width.The first and second floor plans repeat the residential layout with open-to-sky courtyards and the staircase block sized 8 ft x 11 ft. The front elevation and section A-A show RCC beam 6 in x 18 in, slab 5 in thick, and parapet wall 3 ft high. The site plan displays plot dimensions 39 ft 3 in x 48 ft 2 in, along with 13 ft and 7 ft wide lanes. The RCC schedule defines column size 6 in x 18 in, plinth beam 6 in x 18 in, lintel 6 in x 9 in, and reinforcement spacing for beams and slabs.

Residential Building DWG CAD Plan with Rooms Lounge Kitchen Bath

This AutoCAD housing scheme layout provides a complete overview of the Roopkari and Nizamani City plan, showing detailed plot dimensions, area distribution, and site boundaries for <a href="https://cadbull.com/Cad-Architecture" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(0, 0, 0);">architects</a>, civil engineers, and planners. The drawing includes total scheme measurements of 66725 sqft or 1 acre 21.27 ghuntas, with open land sections measuring 98756 sqft or 2 acre 11 ghuntas. Roads surrounding the site include 30 ft wide, 20 ft wide, and 90 ft wide access routes leading toward Hyderabad, Matli city, and Mirpurkhas. The commercial plots are shown with accurate sizes such as 30 ft by 40 ft (1200 sqft), 25 ft by 45 ft (1125 sqft), 20 ft by 45 ft (900 sqft), and larger commercial units measuring 29 ft by 100 ft (2900 sqft). Green belt areas of 61550 sqft and road networks of 230 ft, 110 ft, 100 ft, and 55 ft widths are clearly marked.Residential plot schedules include sizes such as 25 ft by 45 ft (1125 sqft), 30 ft by 45 ft (1350 sqft), and 25 ft by 55 ft (1375 sqft), making this plan ideal for detailed township planning. Amenities, including a 2250 sqft school and an 1800 sqft masjid, are positioned within the scheme for community accessibility. The layout also features clear labeling of boundaries, livestock zones, agricultural land, and commercial corridors. This AutoCAD layout is highly valuable for professionals seeking precise and ready-to-use planning data for urban development and land subdivision <a href="https://cadbull.com/Projects" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(0, 0, 0);">projects</a>.

AutoCAD Housing Scheme Layout with Plot Sizes and Area Details Plan

This detailed AutoCAD DWG layout presents a complete 24 ft by 45 ft residential and commercial building plan designed for practical use and accurate execution. The ground floor includes two shops measuring 9 ft 3 in by 23 ft each, along with a passage that is 3 ft 6 in wide. The layout also features well planned <a href="https://cadbull.com/Master-bedroom" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(0, 0, 0);">bedrooms </a>with sizes such as 10 ft 9 in by 10 ft and 11 ft 9 in by 11 ft, attached and common bathrooms, a kitchen measuring 4 ft 6 in by 8 ft 6 in, open to sky sections, balconies, and a clear staircase area of 6 ft 6 in by 11 ft 6 in which improves vertical circulation.The drawing also includes a front elevation, a full section at X and Y, a site plan, an area plan, and a detailed RCC schedule covering slab thickness of 5 inches, RCC beams of 6 inches by 18 inches, a plinth beam of 9 inches by 18 inches, and columns of 6 inches by 24 inches. The total covered area comes to 2913 square feet, as shown in the calculations. Door and window schedules include a main door of 4 ft by 7 ft, window sizes such as 4 ft 6 in by 4 ft, and ventilation details for accurate <a href="https://cadbull.com/Construction-Cad-Drawing" rel="noopener noreferrer" target="_blank" style="background-color: transparent; color: rgb(0, 0, 0);">construction</a>. This DWG file is ideal for architects, civil engineers, builders, and interior designers seeking a complete and ready-to-use architectural drawing.

24x45 House Plan with Shops and 3 Floor DWG Layout AutoCAD File

This detailed 5-star hotel third-floor plan AutoCAD drawing provides a complete architectural layout featuring guest rooms measuring 4.43x5.64m, 4.42x5.64m and 5.64x4.43m, wide 1.57m corridors, service cores, lifts, housekeeping rooms, AHU rooms, toilets, banquet areas and semi-open gazebos. Designed for professional use, this drawing supports architects, civil engineers, interior designers and builders in understanding accurate hotel planning, circulation flow, structural zoning and guest service arrangements.<h3>Key Highlights of the Drawing</h3><ul><li>Complete Third Floor Plan Layout with clear circulation and zoning</li><li>Guest room arrangements (4.43x5.64m, 4.42x5.64m, 5.64x4.43m) marked precisely</li><li>1.57m wide corridor system ensuring smooth movement</li><li>Multiple lift cores and service areas for efficient hotel operations</li><li>AHU room, pantry, electrical rooms, FHC points, service cores clearly detailed</li><li>Semi-open gazebos, lawn areas and open party spaces for landscape planning</li><li>Banquet hall and support rooms marked for hospitality requirements</li><li>Staircases, toilets, utilities and manager rooms labelled for design clarity</li></ul>

5 Star Hotel Third Floor Plan with Room Layouts and Corridor Details

This detailed industrial building AutoCAD DWG includes complete structural, fabrication, and MEP layouts designed for engineering precision. The drawing set covers multiple sheets with clearly dimensioned plans, sections, schedules, and component detailing.Key features included in this DWG:<ol><li>Full structural layout showing column positions, gridlines, slab design, and foundation details.</li><li>MEP system drawings including piping layouts, electrical routing, and mechanical equipment placement.</li><li>Fabrication details for beams, brackets, steel frames, and connection assemblies.</li><li>Reinforcement schedules with bar bending tables and structural notes.</li><li>Equipment arrangement plans for industrial operations and service areas.</li><li>Multiple sectional views provide clarity on assembly, elevations, and installation guidelines.</li><li>Accurate dimensions and annotations supporting construction, checking, and verification.</li></ol>This DWG is ideal for architects, civil engineers, MEP designers, builders, and industrial facility planners who require a complete technical drawing package for an industrial-type building project.

Industrial Building Structural and MEP Detail Drawings AutoCAD DWG

This AutoCAD DWG file provides complete front and rear elevation drawings for the Villa V5C architectural design. The elevation sheets present a clear, full exterior view, showing&nbsp;wall heights, opening dimensions, façade elements, and structural outlines, suitable for construction implementation.The front elevation displays the main building face, including door and window placements, floor slab levels, parapet details, and roofline height references. It supports visualisation of material finishes and architectural proportions for exterior styling.The rear elevation illustrates the backside arrangement with balcony openings, service areas, ventilation placements, and external access components. This helps in coordinating MEP planning and site boundary positioning.Key Highlights:<ul><li>Clear level markers for each floor height</li><li>Accurate window and door alignment for fabrication</li><li>Defined roof and parapet references for site execution</li><li>Easy editing and plotting in all AutoCAD-supported platforms</li></ul>This drawing is essential for architects, civil engineers, interior designers, contractors, and project consultants working on residential villa development, façade design, and construction detailing.

Villa Front and Rear Elevation Architectural Drawing AutoCAD DWG

This two-storey pavilion gazebo architectural drawing presents a compact 14 ft x 14 ft floor layout designed for recreational and outdoor landscape use. The plan includes column layout, staircase details, roof framing, beam and slab sections, and elevation views with structural reinforcement notes. Both ground floor and upper deck levels are clearly dimensioned, supporting ease of execution for architects, civil engineers, and builders. The drawing also features door and window schedules, foundation footing details, sectional callouts, and roof truss framing specifications for accurate construction. Ideal for resort landscaping, farmhouse sit-outs, public parks, and private garden pavilions, this CAD file helps professionals minimise guesswork and ensure precise onsite implementation.

Two Storey Pavilion Gazebo Architectural Plan 14x14 ft with Elevations

View Neha mishra's CAD designs and drawings on Cadbull.

Neha mishra

Neha mishra

843

Sort by

Default (by Date)

A to Z

Z to A

Sort by Date